Ricoh Lanier AP206, Setup Manual

Page: 367 / 406

23
2. Using RICOH-SCRIPT2 with a
Macintosh
Using RICOH-SCRIPT2 with a Macintosh
You can use the LaserWriter printer driver that comes with your Macintosh
when printing. However, if you use the LaserWriter driver alone, you lose some
printer functions. The lost printer functions can be added by installing the PPD
file.
This documentation describes the specific printer functions and menus that are
added by installing the PPD file. For details about the functions and menus of
the LaserWriter printer driver, see the printer driver's Help.
Option Setup Dialog
Note
❒
Be sure to configure the options correctly. If not configured correctly, options
will not be available even though they are physically installed to the printer.
❒
If you do not know the amount of memory you need to select here, print a
configuration page, which shows how much memory is currently installed to
the printer.
⇒
P.31 “Printer Memory and VM Area”
❖ ❖ ❖ ❖
Total Printer Memory
Use this to select the amount of memory actually installed in the printer. The
following items are available:
[ 32 MB ]
,
[ 64 MB ]
,
[ 96 MB ]
,
[ 128 MB ]
,
[ 160 MB ]
,
[ 192
MB ] and [ 256 MB ] .
❖
❖ ❖
❖
Option Tray
Use this to select if the optional tray is installed in the printer. The following
items are available:
[ None ] and [ Tray 2 ] .
❖ ❖ ❖ ❖
Duplex Unit
When the optional duplex unit is installed to the printer, select [ Installed ] . If
not, select [ Not Installed ] .