Ricoh Lanier AP206, Setup Manual

Page: 392 / 406

UNIX Configuration
4
1
E
Enter the IP address of the printer.
Enter Printer host IP address <xxx.xxx.xxx.xxx> [return=skip]:
192.168.15.16
Note
❒
The IP address will be added to the /etc/hosts file.
❒
If the host name of the printer has already been configured, ignore and
press the
{
RETURN
}
key. Nothing is added to the /etc/hosts file.
F
Enter the host name of the printer.
Enter Printer host name : nphost
Note
❒
The host name will be added to the /etc/hosts file.
❒
If no IP address was entered in step
E
, nothing is added to the /etc/hosts
file.
G
Configure the printer name.
Enter logical printer name [default nphost_prn]
If you want to use the default name, press the
{
RETURN
}
key. If you want to
change this name, enter a new name.
Note
❒
The host name entered in step
F
followed by “_prn” appears in “default”.
H
Set the print option.
Enter remote printer name [default lp]:
Press the
{
RETURN
}
key.
Setup with the installation shell script is finished. If you enter the IP address
in step
E
, the following message appears.
hosts file is modified
I
Make a test print to confirm that the settings are correct.
# lpr -Pnp file_name
# lp -d np file_name
For more information about lpr and lp, see P.10 “Printing Method” .