Ricoh Lanier AP206, Setup Manual

Page: 355 / 406

Using RICOH-SCRIPT2 with Windows 2000
11
1
• Scaling
Use this to enlarge or reduce the original document.
The range of values can be changed between 1 to 1,000 %.
• TrueType Font
Use this to set the TrueType font printing method. Selecting
[ Substitute with
Device Font ]
causes TrueType fonts to be replaced with the printer's fonts in
accordance with the font substitution table.
❖
❖ ❖
❖
Document Options
• Auto Tray Switch
Turning on this setting tells the printer to automatically switch to the other
tray if it has the same paper size as the current tray when paper runs out
while printing.
• Color Mode
Use this to set the output color to [ Black and White ] or [ Color ] .
• Gradation
Use this to set the printing mode to [ Fast ] or [ Standard ] .
•
Color Setting
Use this to set the correction method used for the color conversion. The fol-
lowing items are available:
[ Off ]
*1
, [ Vivid ]
*2
, [ Super Vivid ]
*3
, [ Fine ]
*4
, and
[ Super Fine ]
*5
.
*1
No modification to the color setting.
*2
Select this setting to perform CMYK conversion with enhanced saturation and
brightness to print vivid colors.
*3
Select this setting to perform CMYK conversion. The colors printed with this
setting are more vivid than those printed with the [ Vivid ] setting. All of the
colors in the image, especially the lighter ones, are emphasized.
*4
Select this setting to perform color matching based on the printer's built-in
color rendering dictionaries, and perform CMYK conversion. It makes it pos-
sible to print colors that are close to the displayed colors on the computer
screen.
The color rendering dictionaries refer to the contents selected by the “Color
Profile” setting. This setting is useful when the application and printer driver
do not support the color matching features.
*5
Like the
[ Fine ]
setting, the color rendering dictionary is used, however, output
is more vivid. This setting is enabled to make light colors print more vividly.
Note
❒
The color rendering dictionary that is selected in the “Color Profile” set-
ting is used.
• Color Profile
Use this to select a color rendering dictionary (CRD). The CRD is referred
to for color matching, so you should select the appropriate CRD for the
document you are printing. The CRD you select is also referred to when
[ Fine ] or [ Super Fine ] is selected for “Color Setting”. The following items are
available:
[ Photograph ]
*1
,
[ Presentation ]
*2
, and
[ Solid Color ]
*3
.