Ricoh Lanier AP206 Setup Manual Download Page 402

Page: 402 / 406

UNIX Configuration

Parameters that can be used with rsh, rcp and ftp:

Copying Information to a File

Use the rcp or ftp command to copy information about the specified parameters
to a file.
You can use these commands for BSD and System V UNIX.

Note

❒

The same parameters are used as those above.

% rcp host_name:parameter file_name

% ftp host_name
User: user_name
password:
ftp> get parameter file_name

Note

❒

For the user name and password input nothing, and then press the

{

RETURN

}

key.

Parameter

Information returnedReference

status

Status of the printer.

Information about print jobs.

Network Interface Board
Operating Instructions
provided as a PDF file on
the CD-ROM labeled
“Printer Drivers and Utili-
ties”.

info

Information about the paper tray, output tray
and printer language of the printer.

Printer Reference provid-
ed as a PDF file on the CD-
ROM labeled “Printer
Drivers and Utilities”.

prnlog

Record of the last 10 jobs printed.

Network Interface Board
Operating Instructions
provided as a PDF file on
the CD-ROM labeled
“Printer Drivers and Utili-
ties”.

syslog

Record of messages about the Network Interface
Board.

Summary of Contents for Lanier AP206




















































































































































































































































































































































































































Search results

Summary of Contents for Lanier AP206

Reviews:

Related manuals for Lanier AP206

Brands by name

Popular brands

Ricoh Lanier AP206, Setup Manual

Search results

Summary of Contents for Lanier AP206

Reviews:

Related manuals for Lanier AP206

Brands by name

Popular brands