Ricoh Lanier AP206, Setup Manual

Page: 305 / 406

Remote Maintenance by telnet
79
6
Remote Maintenance by telnet
You can view the printer status and configure the Network Interface Board us-
ing telnet.
Note
❒
You should specify a password so that only the network administrator, or a
person having network administrator privileges, can use remote mainte-
nance.
Using telnet
The following is a sample procedure in using telnet.
Limitation
❒
Only one person at a time can be logged on to do remote maintenance.
A
Using the IP address or host name of the printer, start telnet.
% telnet IP_address
Note
❒
In order to use the host name instead of the IP address, you must write it
to the /etc/hosts file.
B
Type the password.
Note
❒
The factory default is “password”.
C
Type a command.
Reference
For more information about telnet commands, see P.80 “Commands List” .
D
Exit telnet.
msh> logout
When the configuration is changed, a confirmation message requests whether
or not the changes should be saved.
E
Type “yes” to save the changes, and press the
{{{{
ENTER
}}}}
key.
If you do not want to save the changes, type “no”and press the
{
ENTER
}
key.
If you want to make additional changes, type “return” at the command line,
and press the
{
ENTER
}
key.