Ricoh Lanier AP206 Setup Manual Download Page 199

Page: 199 / 406

Moving and Transporting the Printer

115

Moving and Transporting the Printer

CAUTION:

Important

❒

Be sure to disconnect all cables from the printer before transporting it.

❒

The printer is a precision piece of machinery. Take care to avoid damage dur-
ing shipment.

• It is recommended that at least two persons are used to lift the printer. Oth-

erwise, the printer might fall and cause personal injury.

• When lifting the machine, use the grips on both sides. The machine could

break or cause an injury if dropped.

• Before moving the machine, unplug the power cord from the outlet. If the

cord is unplugged abruptly, it could become damaged. Damaged plugs or
cords can cause an electrical or fire hazard.

• When you pull out the plug from the socket, grip the plug to avoid damaging

the cord and causing a fire or an electric shock.

• When moving the printer, be sure to keep it level to avoid spilling the fuser

oil. If oil is spilt, wipe it with alkaline cleaner. Otherwise, the oily surfaces
can create the danger of slipping and personal injury.

Summary of Contents for Lanier AP206




















































































































































































































































































































































































































Search results

Summary of Contents for Lanier AP206

Reviews:

Related manuals for Lanier AP206

Brands by name

Popular brands

Ricoh Lanier AP206, Setup Manual

Search results

Summary of Contents for Lanier AP206

Reviews:

Related manuals for Lanier AP206

Brands by name

Popular brands