Ricoh G-P3, Service Manual

Page: 257 / 413

1: On (The remote service function is enabled.)
5816 007 SSL Disable *CTL
[0 to 1 / 0 / 1/step]
0: On, 1: Off
5816 008 RCG Connect T/O *CTL
Sets the timeout counter for the remote connection.
[1 to 90 / 10 / 1 second/step]
5816 009 RCG Write Timeout *CTL
Sets the timeout counter for writing processing.
[0 to 100 / 60 / 1 second/step]
5816 010 RCG Read Timeout *CTL
Sets the timeout counter for reading processing.
[0 to 100 / 60 / 1 second/step]
5816 011 Port 80 *CTL
Enables or disables access to the SOAP method
via port 80.
[0 to 1 / 0 / 1/step]
0: Disables, 1: Enables
5816 021 Function Flag *CTL
[0 or 1 / 0 / -]
0: Not registered, 1: Registered
5816 022 Install Status *CTL
This SP displays the Cumin installation status.
0: Basil not registered
1: Basil registered
2: Device registered
5816 023
Connect Mode (N/M) *CTL
This SP displays and selects the Cumin connection method.
0: Internet connection
1: Dial-up connection
5816 061
NotiTime ExpTime *CTL
Proximity of the expiration of the certification.
5816 062
HTTP Proxy use *CTL
This SP setting determines if the proxy server is used when the machine communicates
with the service center.
5816 063
HTTP Proxy Host *CTL
5. Service Tables
256
5