Ricoh G-P3, Service Manual

Page: 264 / 413

5824 [NVRAM Upload]
5824 001 NVRAM Upload #
Uploads the UP and SP mode data (except for
counters and the serial number) from the NVRAM
to an SD card.
5825 [NVRAM Download]
5825 001 NVRAM Download #
Downloads the UP and SP mode data from an SD
card to the NVRAM.
5828 [Network Setting] Job spool settings/ Interface selection for Ethernet and wireless LAN
5828 050 1284 Compatible *CTL
Switches Centronics IEEE1284 compatibility on/
off for the network.
[ 0 or 1 / 1 / - ]
0: Disabled, 1: Enabled
• Selecting “0” disables bi-directional data
transmission.
5828 052 ECP *CTL
Switches the ECP setting for Centronics off/on.
[0 or 1 / 1 / -]
0: Disabled, 1: Enabled
• With “1” selected, SP5-828-050 must be
enabled for 1284 mode compatibility.
5828 065 Job Spool *CTL
Switches the job spool on/off.
[0 or 1 / 0 / -]
0: Disabled, 1: Enabled
5828 066 HD job Clear *CTL
Selects the treatment of the job when a spooled job
exists at power on.
[0 or 1 / 1 / 1/step]
0: Data is cleared, 1: Automatically printed
5828 069 Job Spool (Protocol) *CTL
Switches job spooling off or on and enables settings
for job spooling protocols.
[0 or 1 / 1 / 1/step]
Service Mode Table
263
5