Ricoh Aficio CL5000 Maintenance Manual Download

Page: 42 / 80

Replacing Consumables and Maintenance Kit

The fusing unit is installed as
shown in the illustration.

EEEE

Release the green screw that is
fastening the fusing unit.

Note

❒

Use a coin (

) to release the

screw.

❒

The screw cannot be detached.

FFFF

Put on the supplied gloves.

GGGG

Holding the handle, pull the fus-
ing unit slowly until it stops.

Note

❒

Pull out the fusing unit until the
whole of it can be seen.

HHHH

Hold the green handles on the
sides of the fusing unit with both
hands, and then remove it to-
wards the direction shown.

Important

❒

Put the removed fusing unit on
a stable, flat surface.

IIII

Take out the new fusing unit
from the box. Put it on a stable,
flat surface, and then remove the
covering paper.

ZESH401J

ZESH402E

ZESH052J

ZESH419J

ZESH420J

Summary of Contents for Aficio CL5000

















































































Search results

Summary of Contents for Aficio CL5000

Reviews:

Related manuals for Aficio CL5000

Brands by name

Popular brands

Ricoh Aficio CL5000, Maintenance Manual

Search results

Summary of Contents for Aficio CL5000

Reviews:

Related manuals for Aficio CL5000

Brands by name

Popular brands