Ricoh Aficio CL5000 Maintenance Manual Download

Page: 11 / 80

How to Read This Manual

Symbols

In this manual, the following symbols are used:

WARNING:

This symbol indicates a potentially hazardous situation which, if instructions
are not followed, could result in death or serious injury.

CAUTION:

This symbol indicates a potentially hazardous situation which, if instructions
are not followed, may result in minor or moderate injury or damage to property.
* The statements above are notes for your safety.

Important

If this instruction is not followed, paper might be misfed or data might be lost.
Be sure to read this.

Preparation

This symbol indicates the prior knowledge or preparations required before op-
erating.

Note

This symbol indicates precautions for operation, or actions to take after misop-
eration.

Limitation

This symbol indicates numerical limits, functions that cannot be used together,
or conditions in which a particular function cannot be used.

Reference

This symbol indicates a reference.

[

]

Keys that appear on the machine's panel display.
Keys and buttons that appear on the computer's display.

{

}

Keys built into the machine's control panel.
Keys on the computer's keyboard.

Summary of Contents for Aficio CL5000

















































































Search results

Summary of Contents for Aficio CL5000

Reviews:

Related manuals for Aficio CL5000

Brands by name

Popular brands

Ricoh Aficio CL5000, Maintenance Manual

Search results

Summary of Contents for Aficio CL5000

Reviews:

Related manuals for Aficio CL5000

Brands by name

Popular brands