Ricoh Aficio CL5000 Maintenance Manual Download

Page: 14 / 80

Getting Started

Guide to the Printer

Exterior: Front View

Front Cover

Open this cover when replacing the ton-
er, photoconductor unit, fusing unit,
charger, or waste toner bottle or when re-
moving misfed paper.

Power Switch

Use this switch to turn the power on and
off.

Control Panel

Contains keys for printer control and a
panel display that shows the printer sta-
tus.

⇒

p.13 “Control Panel”

Output Tray

Output is stacked here with the print side
down.

Upper Right Cover

Open this cover when installing the Inter-
change Unit.

Right Cover

Open this cover when removing the mis-
fed paper or installing options.

Bypass Tray

Use to print on thick paper, OHP trans-
parencies, custom size paper, as well as
plain paper. Up to 100 sheets of plain pa-
per can be loaded.

Bypass Tray Extension

Pull out this extension to load paper
longer than A4/letter

in the Bypass

Tray.

Tray 1

Up to 250 sheets of plain paper can be
loaded.

ZESX701J

Summary of Contents for Aficio CL5000

















































































Search results

Summary of Contents for Aficio CL5000

Reviews:

Related manuals for Aficio CL5000

Brands by name

Popular brands

Ricoh Aficio CL5000, Maintenance Manual

Search results

Summary of Contents for Aficio CL5000

Reviews:

Related manuals for Aficio CL5000

Brands by name

Popular brands