Ricoh Aficio CL5000 Maintenance Manual Download

Page: 27 / 80

Fuser Oil Type 5000

CCCC

Open the Bypass Tray.

Note

❒

Remove the paper on the By-
pass Tray to prevent them from
falling.

DDDD

If the Duplex Unit is installed,
open it by pushing the catch up-
wards.

EEEE

Open the right cover of the print-
er by pushing up the handle.

The fuser oil unit is placed on the
fusing unit shown in the illustration.

FFFF

Release the green screw that is
fastening the fusing unit.

Note

❒

Use a coin (

) to release the

screw.

❒

The screw cannot be detached.

GGGG

Put on the supplied gloves.

HHHH

Holding the handle, pull the fus-
ing unit slowly until it stops.

Note

❒

Pull out the fusing unit until the
whole of it can be seen.

ZESH047J

ZESH048J

ZESH208J

ZESH401J

ZESH402E

ZESH052J

Summary of Contents for Aficio CL5000

















































































Search results

Summary of Contents for Aficio CL5000

Reviews:

Related manuals for Aficio CL5000

Brands by name

Popular brands

Ricoh Aficio CL5000, Maintenance Manual

Search results

Summary of Contents for Aficio CL5000

Reviews:

Related manuals for Aficio CL5000

Brands by name

Popular brands