Renishaw RCU10, Installation And User Manual, Page: 54 / 202

System installation 4-5
RCU CS display units
The user may select the display units used by RCU CS. These settings are purely for
display purposes on the RCU CS software and do not affect operation.

Select Configure Units from the Tools menu.

Air pressure units may be either Millibars or Inches of Mercury.

Temperature units may be either Celsius or Fahrenheit .

Distance units may be either Metric or Imperial (when using imperial distance
measurements, values are entered and displayed in decimal format). Three options
are available: Inches , Millimetres or Metres .
4.2 System configuration
Press the Configuration button in the button bar. The following window will appear:
Figure 4.2 – Configuration window (System tab)
Each of the four tabs: System, Sensors, Compensation and Parameters, must be
configured in turn. The following sections take you through this process.
Note the
pressure
sensor and
RCU10
address
before leaving
this screen,
for example
75L324 and
RCU10
address 1