Renishaw RCU10, Installation And User Manual, Page: 128 / 202

Compensation system status information and diagnostics D-11
Table D.9 – Sensor status errors/warnings
Error State Description Corrective action (if necessary)
Out Of
Range OFF Sensor is operating within its normal range of
operation. None required.
RED Sensor is reading outside its normal
operating range.
Sensor failure. Move sensor to a more suitable
environment.
Replace sensor.
Rate
Exceeded OFF Sensor is operating within its normal rate of
change. None required.
RED Sensor is changing value at a quicker rate
than its normal setting.
Sensor failure. Move sensor to a more suitable
environment.
Replace sensor
Calibration
Failure OFF Sensor is operating within its calibrated
specification. None required.
RED Sensor data is out of calibration. Return sensor to Renishaw for
recalibration.
Not Ready OFF Sensor is operating normally. None required.
RED Sensor’s operational accuracy is not ready.
Sensor is still initialising. Wait for sensor to finish initialising
procedure.
Disconnect sensor, wait a few
seconds, and then reconnect sensor.
Internal
Error OFF Sensor is operating without error.
Sensor is operating with any number of the
above errors present (non-conflicting). None required.
Check other sensor status error
conditions.
RED More than one of the above errors occurring
simultaneously are conflicting.
Sensor failure. Check other sensor status error
conditions.
Replace sensor
NOTE: Sensor Status and Compensator Status titles will display with a red or green
background depending upon whether an error/warning has been indicated.