Renishaw RCU10, Installation And User Manual, Page: 113 / 202

C-6 RCU CS
C.2.2 Installation procedure

Insert the installation CD into a drive. The installation program should run
automatically. If this does not happen, manually run the program setup.exe by
selecting Run from the Start menu and typing “d:\setup.exe”, where “d” is the letter
relating to the CD-ROM drive being used.

Click Next to acknowledge the welcome screen.

Read the Software Licence Agreement and press Yes if you accept its terms.

Select the destination location and press Next to start installing the software.

Select “ Yes, I want to restart my computer ” and click on Finish to complete the
installation.
Note: Full instructions for the installation and removal of the RCU CS software can also
be found in a text file (readme.txt) in the software’s installed directory. This file will also
contain any updates on the latest version of RCU CS.
This program will install the RCU CS software and associated files in the default folder:
C:\Program Files\Renishaw\RCU CS (if using a Windows 64-bit PC then C:\Program Files
(x86)\Renishaw\RCU CS).
A shortcut named RCU CS will be created on the Start menu, desktop, and also under
the group:
Start -> Programs -> Renishaw RCU10
Uninstalling the software
To uninstall the software, use the Uninstall option.
Start -> Programs -> Renishaw RCU10 -> Uninstall RCU CS
If the software fails to fully uninstall, the likeliest cause is that the RCU CS folder cannot
be deleted as it still contains files. The reason for this may be that data log files have
been automatically stored there.
NOTES:
1. Previous versions of Renishaw RCU-CS software must be uninstalled before
installing an upgrade.
2. The removal of any shared files may affect other applications installed on your PC.
3. Prior to uninstalling or upgrading RCU-CS it is recommended that the RCU10
configuration is backed up in accordance with section F2.1.1.