manualshive.com logo in svg

Renesas F-ZTAT H8/3642A Series, Hardware Manual, Page: 226 / 551

Share
Download
Renesas F-ZTAT H8/3642A Series Hardware Manual Download Page 226

Section 9   Timers 

Rev. 6.00  Sep 12, 2006  page 204 of 526 
REJ09B0326-0600 

 

9.2 Timer 

A 

9.2.1 Overview 

Timer A is an 8-bit timer with interval timing and real-time clock time-base functions. The clock 
time-base function is available when a 32.768-kHz crystal resonator is connected. A clock signal 
divided from 32.768 kHz or from the system clock can be output at the TMOW pin. 

Features 

Features of timer A are given below. 

• 

Choice of eight internal clock sources (

φ

/8192, 

φ

/4096, 

φ

/2048, 

φ

/512, 

φ

/256, 

φ

/128, 

φ

/32, 

φ

/8). 

• 

Choice of four overflow periods (1 s, 0.5 s, 0.25 s, 31.25 ms) when timer A is used as a clock 
time base (using a 32.768 kHz crystal resonator). 

• 

An interrupt is requested when the counter overflows. 

• 

Any of eight clock signals can be output from pin TMOW: 32.768 kHz divided by 32, 16, 8, or 
4 (1 kHz, 2 kHz, 4 kHz, 8 kHz), or the system clock divided by 32, 16, 8, or 4. 

 

Summary of Contents for F-ZTAT H8/3642A Series








































































































































































































































































































































































































































































































































































Reviews:

No comments