Renault ALASKAN 2017 Driver'S Handbook Manual Download

Page: 106 / 340

A key number plate is supplied with your key. Record

the key number on the key number plate/metal tag

and keep it in a safe place (such as your wallet),

NOT IN THE VEHICLE. RENAULT does not record

key numbers so it is very important to keep track of

your key number plate.
A key number is only necessary when you have lost

all keys and do not have one to duplicate from. If you

still have a key, this key can be duplicated by an

approved dealer or qualified workshop.

KEY (where fitted)

1. Master key (with integrated key fob) (2)
2. Key number plate (1)
As many as 5 master keys with integrated key fob

can be registered and used with one vehicle.

ANTI-THEFT SYSTEM (ATS*) KEY

(where fitted)

1. ATS key (molded) (2)
2. Key number plate (1)

1. ATS key (with integrated key fob) (2)
2. Key number plate (1)

Your vehicle can only be driven with the ATS keys,

which are registered to your vehicle’s ATS compo-

nents. As many as 5 ATS keys can be registered

and used with one vehicle. The new keys must be

registered by an approved dealer or qualified work-

shop prior to use with the ATS of your vehicle. Since

the registration process requires erasing all memory

in the ATS components when registering new keys,

be sure to take all ATS keys that you have to the

approved dealer or qualified workshop.
CAUTION
Do not allow the ATS key, which contains an elec-

trical transponder, to come into contact with wa-

ter or salt water. This could affect the system

function.
*: Immobilizer

REMOTE CONTROL KEY

(where fitted)

1. Remote Control Key (2)

JVP0324XZ

JVP0085XZ

JVP0324XZ

SPA2502Z

KEYS

3-2 Pre-driving checks and adjustments

Summary of Contents for ALASKAN 2017





















































































































































































































































































































































Search results

Summary of Contents for ALASKAN 2017

Reviews:

Related manuals for ALASKAN 2017

Brands by name

Popular brands

Renault ALASKAN 2017, Driver'S Handbook Manual

Search results

Summary of Contents for ALASKAN 2017

Reviews:

Related manuals for ALASKAN 2017

Brands by name

Popular brands