Renault ALASKAN 2017 Driver'S Handbook Manual Download

Page: 207 / 340

Condition A

This warning appears if there is a malfunction in the

AdBlue® SCR system.
Have the system checked by an approved dealer or

qualified workshop as soon as possible.
Condition B

This warning provides you with an estimation of the

distance (0 to 1000 km (0 to 621 miles)) that can be

driven before inspecting and/or repairing the Ad-

Blue® SCR system.
Condition C

•

If this warning appears while the engine is

stopped, the engine cannot be started. Contact

an approved dealer or qualified workshop.

•

If this warning appears while the engine is run-

ning, the vehicle can still be driven to the nearest

approved dealer or qualified workshop.

•

If the ignition switch is turned off while this warn-

ing appears, the engine can be restarted within

3 minutes. Stop the vehicle in a safe place and

contact an approved dealer or qualified work-

shop.

Have the AdBlue® SCR system inspected and/or

repaired by an approved dealer or qualified work-

shop as soon as possible.

WARNING

•

Be careful not to burn yourself with exhaust

gases.

•

Do not park the vehicle over flammable mate-

rials such as dry grass, waste paper or rags,

as they may burn easily.

CAUTION
To maintain maximum Diesel Particulate Filter

(DPF) performance, follow these precautions:

•

Use low-sulphur fuel.

•

Use an engine oil specified by RENAULT. (Re-

fer to the maintenance service booklet for

your vehicle.) If an engine oil not a specified

by RENAULT is used, it could cause DPF mal-

function or reduced fuel efficiency.

•

Do not modify the DPF, muffler or exhaust

pipe. Otherwise it could affect the DPF perfor-

mance and cause a malfunction.

•

Do not kick or hit the DPF. The DPF has a

built-in catalyst system in the muffler. Such

an impact could cause DPF damage.

JVM0546XZ

JVM0547XZ

JVM0548XZ

DIESEL PARTICULATE FILTER

(DPF) (where fitted)

Starting and driving

5-5

Summary of Contents for ALASKAN 2017





















































































































































































































































































































































Search results

Summary of Contents for ALASKAN 2017

Reviews:

Related manuals for ALASKAN 2017

Brands by name

Popular brands

Renault ALASKAN 2017, Driver'S Handbook Manual

Search results

Summary of Contents for ALASKAN 2017

Reviews:

Related manuals for ALASKAN 2017

Brands by name

Popular brands