Renault ALASKAN 2017 Driver'S Handbook Manual Download Page 158

Page: 158 / 340

MANUAL AIR CONDITIONER AND

HEATER (Type B)

1. A/C button/Fan speed control

dial

2. Air flow control buttons
3. Temperature control dial
4. Front defogger

button

5. Rear defogger

button (See “Defogger

switch (where fitted)” in the “2. Instruments

and controls” section.) (where fitted)

6. Air recirculation

button

Controls

Turning system on/off:
To turn on the system, turn the fan speed control

dial out of the <OFF> position. Turn the dial

anticlockwise to the <OFF> position to turn off the

system.

Fan speed control:
Turn the fan speed control

dial clockwise to

increase the fan speed.
Turn the fan speed control

dial anticlockwise

to decrease the fan speed.
Ventilation:
This mode directs outside air from the side and

centre vents.
1. Push the air recirculation

button. (The indi-

cator light will turn off.)

2. Push the

button. (The indicator light will

turn on.)

3. Turn the fan speed control

dial to the de-

sired position.

4. Turn the temperature control dial to the desired

position.

Temperature control:
Turn the temperature control dial to set the desired

temperature. Turn the dial between the middle and

the right position to select the hot temperature. Turn

the dial between the middle and the left position to

select the cool temperature.
Air flow control:
Push one of the air flow control buttons to select the

air flow outlets.

—

Air flows mainly from centre and side

vents.

—

Air flows mainly from centre and side

vents and foot outlets.

—

Air flows mainly from the foot outlet

and partly from the defogger.

—

Air flows mainly from the defogger and

foot outlets.

Outside air circulation:
Push the air recirculation

button. (The indica-

tor light will turn off.) The air flow is drawn from out-

side the vehicle.
Select the outside air circulation mode for normal

heating or air conditioning operation.
Air recirculation:
Push the air recirculation

button on. (The indi-

cator light will illuminate.)
The air will recirculate inside the vehicle.

JVH0888XZ

4-26 Display screen, heater and air conditioner, and audio system

Summary of Contents for ALASKAN 2017





















































































































































































































































































































































Search results

Summary of Contents for ALASKAN 2017

Reviews:

Brands by name

Popular brands

Renault ALASKAN 2017, Driver'S Handbook Manual

Search results

Summary of Contents for ALASKAN 2017

Reviews:

Brands by name

Popular brands