Renault ALASKAN 2017 Driver'S Handbook Manual Download Page 194

Page: 194 / 340

Receiving a call

When receiving an incoming call, the display will

show the caller’s phone number (or a notification

message that the caller’s phone number cannot be

shown) and three operation icons.
1. Answering and during a call:
Answer the call by pressing <ENTER> (the

highlighted).
By pressing <ENTER>, you can select the following

options:

•

Ending the call by selecting

and press

<ENTER>.

•

Put the call on hold by selecting

and press

<ENTER>.

•

[

]

Use this item (the transfer handset command) to

transfer the call from the audio system to your

mobile phone.

To transfer the call back to hands-free via the

audio system select [

•

[#123]

Use this item to enter numbers during a call. For

example, if directed by an automated phone sys-

tem to dial an extension number the system will

send the tone associated with the selected num-

ber.

2. Put a call on hold:
Rotate the <MENU> dial until

is highlighted,

press <ENTER>. The call is on hold. Pressing

<ENTER> accepts the call, rotate the <MENU> dial

clockwise and press <ENTER> to reject.
3. Rejecting a call:
Rotate the <MENU> dial until

is highlighted,

press <ENTER>. The call is rejected.

Initiating a call

A call can be initiated using one of the following

methods:
– Making a call from the phone book
– Manually dialling a phone number
– Redialling
– Using call history (Call List menu)

•

Dialled

•

Received

•

Missed

Making a call from the phone book:
Once the Bluetooth

connection has been made,

between the registered mobile phone and the audio

system, phone book data will be transferred auto-

matically to the audio system. The transfer may take

a while before completion.
NOTE
Phone book data will be erased when:

•

Switching to another registered mobile

phone.

•

Mobile phone is disconnected.

•

The registered mobile phone is deleted from

the audio system.

1. Press <

2. Turn the <MENU> dial and scroll down to [Phone

Book] then press <ENTER>.

3. Scroll down through the list, select the appropri-

ate contact name (highlighted), and press

<ENTER>.

4. A following screen will show the number to be

dialled. If correct, press <ENTER> again to dial

the number.
If the contact has more numbers assigned for

(home),

(mobile), or

(office), scroll,

and select the appropriate number to dial.

4-62 Display screen, heater and air conditioner, and audio system

Summary of Contents for ALASKAN 2017





















































































































































































































































































































































Search results

Summary of Contents for ALASKAN 2017

Reviews:

Brands by name

Popular brands

Renault ALASKAN 2017, Driver'S Handbook Manual

Search results

Summary of Contents for ALASKAN 2017

Reviews:

Brands by name

Popular brands