Renault ALASKAN 2017 Driver'S Handbook Manual Download Page 246

Page: 246 / 340

When the ignition switch is in the OFF position,

ECO management display appears.

➀

Previous 5 times (History)

➁

Current fuel economy

➂

Best fuel economy

The result of ECO evaluation is displayed 30 sec-

onds after the ignition switch is placed in the on

position and the vehicle is driven at least 500 meters

(1/3 miles).

➀

: The average fuel economy for the previous 5

times will be displayed.

➁

: The average fuel economy since the last reset

will be displayed.

➂

: The best fuel economy of the past history will be

displayed.
The ECO drive report can be set to be ON or OFF.

See “[ECO Drive Report] (where fitted)” in the

“2. Instruments and controls” section.

WARNING

•

Do not stop or park the vehicle over flam-

mable materials such as dry grass, waste pa-

per or rags. They may ignite and cause a fire.

•

Safe parking procedures require that both the

parking brake be applied and the shift lever

placed into the P (Park) position for Automatic

Transmission (AT) model or in an appropriate

gear for Manual Transmission (MT) model.

Failure to do so could cause the vehicle to

move unexpectedly or roll away and result in

an accident.

•

When parking the vehicle, make sure the shift

lever is moved to the P (Park) position. The

shift lever cannot be moved out of the P (Park)

position without depressing the footbrake

pedal (AT model).

•

Never leave the engine running while the ve-

hicle is unattended.

•

To help avoid risk of injury or death through

unintended operation of the vehicle and/or its

systems, do not leave children, people who

require the assistance of others or pets unat-

tended in your vehicle. Additionally, the tem-

perature inside a closed vehicle on a warm

day can quickly become high enough to cause

a significant risk of injury or death to people

and pets.

JVS0451XZ

ECO DRIVE REPORT

PARKING

5-44 Starting and driving

Summary of Contents for ALASKAN 2017





















































































































































































































































































































































Search results

Summary of Contents for ALASKAN 2017

Reviews:

Related manuals for ALASKAN 2017

Brands by name

Popular brands

Renault ALASKAN 2017, Driver'S Handbook Manual

Search results

Summary of Contents for ALASKAN 2017

Reviews:

Related manuals for ALASKAN 2017

Brands by name

Popular brands