Renault ALASKAN 2017 Driver'S Handbook Manual Download Page 189

Page: 189 / 340

increased speed while reversing or fast forwarding.

When the button is released, the track returns to

normal play speed.

Bluetooth® audio player operation

If you have a compatible Bluetooth® audio device

that is capable of playing audio files, the device can

be connected to the vehicle’s audio system so that

the audio files on the device play through the vehi-

cle’s speakers
Bluetooth® trademark:

Bluetooth® is a trademark

owned by Bluetooth SIG, Inc.

and licensed to Robert Bosch

GmbH.

Connecting Bluetooth® audio:

To connect your Bluetooth® audio device to the

vehicle, follow the procedure below:
1. Push the <SETUP> button.
2. Select the [Telephone & Bluetooth] key.

3. Select the [Pair New Device] key.
4. The system acknowledges the command and

asks you to initiate connecting from the phone

handset. The connecting procedure of the mo-

bile phone varies according to each mobile phone

model. See the Bluetooth® device Owner’s

Manual for details.

Bluetooth® audio player main operation:
To switch to the Bluetooth® audio mode, push the

AUX button repeatedly until the Bluetooth® audio

mode is displayed on the screen.
The controls for the Bluetooth® audio are displayed

on the screen.

AUX device player operation

The AUX input jack is located on the lower part of

the instrument panel. See “AUX (Auxiliary) input

jack” earlier in this section. The AUX audio input

jack accepts any standard analog audio input such

as from a portable cassette tape/CD player, MP3

player or laptop computer.
RENAULT strongly recommends using a stereo mini

plug cable when connecting your music device to

the audio system. Music may not play properly when

a monaural cable is used.

button:

To switch to the AUX mode, push the AUX button

until the AUX mode is selected while the ignition

switch is placed in the ON or ACC position.

For details, see the separately provided

Touchscreen Navigation Owner’s Manual.

JVH0682XZ

Example

NAA1687

TOUCHSCREEN NAVIGATION

(where fitted)

Display screen, heater and air conditioner, and audio system

4-57

Summary of Contents for ALASKAN 2017





















































































































































































































































































































































Search results

Summary of Contents for ALASKAN 2017

Reviews:

Related manuals for ALASKAN 2017

Brands by name

Popular brands

Renault ALASKAN 2017, Driver'S Handbook Manual

Search results

Summary of Contents for ALASKAN 2017

Reviews:

Related manuals for ALASKAN 2017

Brands by name

Popular brands