Renault ALASKAN 2017 Driver'S Handbook Manual Download Page 54

Page: 54 / 340

SUPPLEMENTAL AIR BAG SYSTEMS

1. Crush zone sensor
2. Supplemental driver’s knee air bag module

(where fitted)

3. Supplemental front air bag modules
4. Supplemental curtain side-impact air bag infla-

tors (where fitted)

5. Supplemental curtain side-impact air bag

modules (where fitted)

6. Air bag Control Unit (ACU)
7. Satellite sensors (where fitted)
8. Seat belt pre-tensioner retractors (where fit-

ted)

9. Supplemental side-impact air bag modules

(where fitted)

WARNING

•

Do not place any objects on the steering wheel

pad, on the instrument panel, under the steer-

ing column and near the front door finishers

and the front seats. Do not place any objects

between any occupants and the steering

wheel pad, on the instrument panel, and near

the front door finishers and the front seats.

Such objects may become dangerous projec-

tiles and cause injury if a supplemental air

bag inflates.

•

Immediately after inflation, several supple-

mental air bag system components will be hot.

Do not touch them: you may severely burn

yourself.

•

No unauthorised changes should be made to

any components or wiring of the supplemen-

tal air bag systems. This is to prevent acci-

dental inflation of the supplemental air bags

or damage to the supplemental air bag sys-

tems.

•

Do not make unauthorised changes to your

vehicle’s electrical system, suspension sys-

tem, front end structure, and side panels. This

could affect proper operation of the supple-

mental air bag systems.

NPA1527

1-36 Safety — seats, seat belts and supplemental restraint system

Summary of Contents for ALASKAN 2017





















































































































































































































































































































































Search results

Summary of Contents for ALASKAN 2017

Reviews:

Related manuals for ALASKAN 2017

Brands by name

Popular brands

Renault ALASKAN 2017, Driver'S Handbook Manual

Search results

Summary of Contents for ALASKAN 2017

Reviews:

Related manuals for ALASKAN 2017

Brands by name

Popular brands