Renault ALASKAN 2017 Driver'S Handbook Manual Download Page 145

Page: 145 / 340

•

Do not strike the cameras. They are precision

instruments. Doing so could cause a malfunc-

tion or cause damage resulting in a fire or an

electric shock.

CAUTION
Do not scratch the lens when cleaning dirt or

snow from the front of the camera.
NOTE
The colour of the view on the 360° Camera dis-

play is different from the actual view because the

system uses infrared cameras.

Display screen, heater and air conditioner, and audio system

4-13

Summary of Contents for ALASKAN 2017





















































































































































































































































































































































Search results

Summary of Contents for ALASKAN 2017

Reviews:

Related manuals for ALASKAN 2017

Brands by name

Popular brands

Renault ALASKAN 2017, Driver'S Handbook Manual

Search results

Summary of Contents for ALASKAN 2017

Reviews:

Related manuals for ALASKAN 2017

Brands by name

Popular brands