Renault ALASKAN 2017 Driver'S Handbook Manual Download Page 94

Page: 94 / 340

•

Do not operate the cleaner if the washer fluid

reservoir is empty or frozen.

See “Window washer fluid” in the “8. Maintenance

and do-it-yourself” section for details on refilling the

reservoir tank.

The horn switch operates regardless of the ignition

switch position except when the battery is

discharged.
When the horn switch is pushed and held, the horn

will sound. Releasing the horn switch will cease the

horn sound.

MANUAL WINDOWS (where fitted)

The side windows can be opened

➀

or closed

➁

by turning the hand crank on each door.

POWER WINDOWS (where fitted)

WARNING

•

Make sure that all passengers have their

hands, etc. inside the vehicle before operat-

ing the power windows.

•

To help avoid risk of injury or death through

unintended operation of the vehicle and/or its

systems, do not leave children, people who

require the assistance of others, or pets unat-

tended in your vehicle. Additionally, the tem-

perature inside a closed vehicle on a warm

day can quickly become high enough to cause

a significant risk of injury or death to people

and pets.

The power windows operate when the ignition

switch is in the “ON” position.

NIC3084

SIC4435Z

HORN

WINDOWS

2-36 Instruments and controls

Summary of Contents for ALASKAN 2017





















































































































































































































































































































































Search results

Summary of Contents for ALASKAN 2017

Reviews:

Related manuals for ALASKAN 2017

Brands by name

Popular brands

Renault ALASKAN 2017, Driver'S Handbook Manual

Search results

Summary of Contents for ALASKAN 2017

Reviews:

Related manuals for ALASKAN 2017

Brands by name

Popular brands