Renault ALASKAN 2017 Driver'S Handbook Manual Download Page 198

Page: 198 / 340

EU RED Directive 2014/53/EU

Hereby, Robert Bosch Car Multimedia GmbH de-

clares that the radio equipment type LCN2K70A00/

LCN2K70A10 is in compliance with Directive 2014/

53/EU. The full text of the EU declaration of confor-

mity is available at the following internet address:

http://cert.bosch-carmultimedia.net
Any change of the radio equipment or usage with

other accessories, components or software as

specified will make a re-assessment according com-

pliance to the legal approval necessary.

Frequency Band

Radiated

Power

(EIRP)

Hints/Restriction

2400 MHz – 2480

MHz

Bluetooth

<10 mW

Internal not acces-

sible by user

CONTROL BUTTONS AND

MICROPHONE

Steering wheel switch:

1. Volume control

− switch

2. Phone send

button

3. Phone end

button

4. Tuning

switch

Control panel:

1. Phone

button

Microphone:
Microphone is located near the map lights.

PAIRING PROCEDURE

NOTE
The connecting procedure must be performed

when the vehicle is stationary. If the vehicle starts

moving during the procedure, the procedure will

be cancelled.
1. Push the <SETUP> button on the control panel.
2. Touch the [Telephone & Bluetooth] key.
3. Touch the [Pair New Device] key.

If no device has been paired yet all other options

will be unavailable.

4. Initiate the pairing process from the handset. The

system will display the message asking if PIN is

displayed on your Bluetooth® device.

1. If the PIN is displayed on your Bluetooth® de-

vice, select [Yes] to complete the pairing pro-

cess.

2. If the PIN is not displayed on your Bluetooth®

device, select [No] and complete the pairing pro-

cess according to the instructions in the Blue-

tooth® device’s Owner’s Manual.

For more information, see the Bluetooth® device’s

Owner’s Manual.

JVH0853XZ

JVH1083XZ

4-66 Display screen, heater and air conditioner, and audio system

Summary of Contents for ALASKAN 2017





















































































































































































































































































































































Search results

Summary of Contents for ALASKAN 2017

Reviews:

Related manuals for ALASKAN 2017

Brands by name

Popular brands

Renault ALASKAN 2017, Driver'S Handbook Manual

Search results

Summary of Contents for ALASKAN 2017

Reviews:

Related manuals for ALASKAN 2017

Brands by name

Popular brands