Renault ALASKAN 2017 Driver'S Handbook Manual Download | Manualshive

Page: 137 / 340

background image

– [Software Licenses]

•

[Navigation]

•

[Telephone & Bluetooth]

•

[Traffic Messages]

•

[Radio]

[Audio] settings

Audio settings can be adjusted from the audio setup

screen.
This item is available only when the audio system is

turned on.
1. Push the <SETUP> button.
2. Touch the [Audio] key.
3. Select the item you wish to adjust.
[Bass]/[Treble]/[Balance]/[Fade]:
Touch the adjustment bar next to the corresponding

keys on the display to adjust the tone quality and

speaker balance.
The levels of these features can also be adjusted

with the <ENTER>/Scroll dial.
[Speed Sensitive Vol.]:
Speed sensitive volume function increases the vol-

ume of the audio system as the speed of the vehicle

increases. Choose the desired effect level from 0

(OFF) to 5. The higher the setting, the more the vol-

ume increases in relation to vehicle speed.

[AUX Level]:
This feature controls the volume level of incoming

sound when an auxiliary device is connected to the

system. Select the level from [Quiet], [Medium], and

[Loud].

[System settings]

Various system settings can be adjusted from the

system settings.
1. Push the <SETUP> button.
2. Select the [System] key.
3. Select the item you wish to adjust.
[Display]:
Select the corresponding keys to adjust the set-

tings.

•

[Brightness]:
Adjusts the brightness of the display.

•

[Display Mode]:
Adjusts to fit the level of lighting in the vehicle.

Touch the [Display Mode] key to cycle through

options of the mode ([Day], [Night] and [Auto]).

•

[Scroll Direction]:
Adjusts the direction of the menu scroll. Choose

either the up arrow or down arrow.

[Clock]:
Select the corresponding keys to adjust the set-

tings.

•

[Time Format]:
The time format setting can be selected from 12

hour and 24 hour formats.

•

[Date Format]:
The day, month and year display can be selected

from five formats.

•

[Clock Mode]:
Select the clock mode from [Manual], [Time

Zone] and [Auto].
When [Manual] is selected, you can set the clock

mode manually with the [Set Clock Manually]

key.
Select [Auto] to automatically maintain the time

using GPS.

•

[Set Clock Manually]:
Mode (AM/PM) (where fitted), Hours, Minutes,

Day, Month and Year can be set manually if

“Manual” is selected in the Clock Mode setting.

•

[Daylight Savings Time]:
Turns the daylight savings time ON or OFF.

•

[Time Zone]:
Select the applicable time zone from the list.

Display screen, heater and air conditioner, and audio system

4-5

«
...
135
136
137
138
139
...
»

Summary of Contents for ALASKAN 2017





















































































































































































































































































































































Reviews:

No comments

Related manuals for ALASKAN 2017

Brand: Suzuki Pages: 353

Brand: Torklift Pages: 16

Brand: Baja Designs Pages: 5

Brand: Draw tite Pages: 4

Brand: EFILive Pages: 25

Brand: Sagem Pages: 10

Brand: Mopar Pages: 18

Brand: Cadillac Pages: 335

Brand: true-i Pages: 11

Brand: Grillo Pages: 71

Brand: Lexus Pages: 82

Brand: Suzuki Pages: 504

1995 Roadmaster

Brand: Buick Pages: 340

Brand: MacNeil Pages: 2

Brand: Chevrolet Pages: 324

Brand: Istar Pages: 6

Brand: Menabo Pages: 4

Brand: Adaptiv Mini Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands