Renault ALASKAN 2017 Driver'S Handbook Manual Download Page 153

Page: 153 / 340

This symbol indicates that the vents are

closed. Moving the control to this

direction will close the vents.

This symbol indicates that the vents are

open. Moving the control to this direc-

tion will open the vents.

Adjust the air flow direction of the vents by moving

the centre knob (up/down, left/right) until the de-

sired position is achieved.

WARNING

•

The heater and air conditioner operate only

when the engine is running.

•

Never leave children or adults who would nor-

mally require the support of others alone in

the vehicle. Pets should not be left alone ei-

ther. They could unknowingly activate

switches or controls, or move the vehicle, and

inadvertently become involved in a serious ac-

cident and injure themselves. On hot, sunny

days, temperatures in a closed vehicle could

quickly become high enough to cause severe

or possibly fatal injuries to people or animals.

•

Do not use the recirculation mode for long

periods as it may cause the interior air to be-

come stale and the windows to fog up.

•

Do not adjust the heating and air conditioning

controls while driving so that full attention may

be given to vehicle operation.

The heater and air conditioner operate when the

engine is running. The air blower will operate even if

the engine is turned off and the ignition switch is

placed in the ON position.
NOTE

•

Condensation forms inside the air condition-

ing unit when the air conditioner (where fit-

ted) is running, and is safely discharged un-

derneath your vehicle.
Traces of water on the ground are therefore

normal.

•

Odours from inside and outside the vehicle

can build up in the air conditioner unit. Odour

can enter the passenger compartment

through the vents.

•

When parking, set the heater and air condi-

tioner controls to turn off air recirculation to

allow fresh air into the passenger compart-

ment. This should help reduce odours inside

the vehicle.

HEATER AND AIR CONDITIONER

Display screen, heater and air conditioner, and audio system

4-21

Summary of Contents for ALASKAN 2017





















































































































































































































































































































































Search results

Summary of Contents for ALASKAN 2017

Reviews:

Related manuals for ALASKAN 2017

Brands by name

Popular brands

Renault ALASKAN 2017, Driver'S Handbook Manual

Search results

Summary of Contents for ALASKAN 2017

Reviews:

Related manuals for ALASKAN 2017

Brands by name

Popular brands