Renault ALASKAN 2017 Driver'S Handbook Manual Download Page 249

Page: 249 / 340

When the corner of the vehicle moves closer to an

object, the corner sensor indicators

➀

appears.

When the centre of the vehicle moves close to an

object, the centre sensor indicator

➁

appears.

When the object is detected, the indicator (green)

appears and the tone sounds intermittently. When

the vehicle moves closer to the object, the colour of

the indicator turns yellow. When the vehicle is very

close to the object, the indicator turns red, and the

tone sounds continuously.

PARKING SENSOR (SONAR)

SYSTEM OFF SWITCH

The parking sensor (sonar) system OFF switch on

the instrument panel allows the driver to turn the

parking sensor (sonar) system ON or OFF. To turn

the parking sensor (sonar) system ON or OFF, the

ignition switch must be in the ON position.
The indicator light on the switch will illuminate when

the system is turned ON.
If the indicator light flashes when the parking sensor

(sonar) system is not turned off, it may indicate a

malfunction in the parking sensor (sonar) system.
The parking sensor (sonar) system will be turned

ON automatically under the following conditions:

•

When the ignition switch is switched from the

OFF position to the ON position.

•

When the shift lever is shifted into the R (Re-

verse) position.

•

When the vehicle speed reaches at least 10 km/h

(6 MPH) and decreases.

The automatic system enabling function can be

turned ON or OFF with the [Sensor] key in the

[Parking Aids] menu. See “Vehicle information

display” in the “2. Instruments and controls” sec-

tion.

PARKING SENSOR (SONAR)

SYSTEM SETTINGS

The following settings for the parking sensor (sonar)

system can be changed by using the switches on

the steering-wheel-mounted controls. For details,

see “Vehicle information display” in the “2. Instru-

ments and controls” section.

[Sensor]

Activate or deactivate the Parking sensor system.
ON (default) - OFF

[Volume]

Adjust the volume of the tone.
[High] - [Med.] (default) - [Low]

[Range]

Adjust the detection range of the sensor.
[Far] - [Mid.] (default) - [Near]

JVS0539XZ

NIC2804

Starting and driving

5-47

Summary of Contents for ALASKAN 2017





















































































































































































































































































































































Search results

Summary of Contents for ALASKAN 2017

Reviews:

Brands by name

Popular brands

Renault ALASKAN 2017, Driver'S Handbook Manual

Search results

Summary of Contents for ALASKAN 2017

Reviews:

Brands by name

Popular brands