[Turn Indicator]:
Select this sub-menu to enable/disable the items
described below to ON or OFF.
•
[3 Flash On]
Select this sub-menu to enable/disable the [3
Flash On] lane change signal feature. See, “Turn
signal switch” in the “2. Instruments and
controls” section.
[Unlocking] (where fitted):
Select this sub-menu to enable/disable the items
described below to ON or OFF.
•
[I-Key Door Lock]
Select this item to activate/deactivate the request
switch on the door. See, “Doors” in the “3. Pre-
driving checks and adjustments” section.
[Wipers]:
Select this sub-menu to enable/disable the items
described below to ON or OFF.
•
[Speed Dependent]
Select this item to activate/deactivate the speed
dependent wiper speed feature. See, “Wiper
and washer switch” in the “2. Instruments and
controls” section.
[Maintenance]
The following sub-menus are available under the
[Maintenance] menu.
•
[Service]
•
[Filter]
•
[Tyre]
•
[Other]
[Service] (where fitted):
Select this item to show the remaining distance until
servicing is required.
To reset the service indicator, push <ENTER> and
select [Yes].
The distance to service interval cannot be adjusted
manually. The interval is set automatically.
NOTE
Be sure the distance to service indicator is reset
after servicing. Otherwise, the service indicator
will continue to be displayed.
[Filter] (where fitted):
Select this item to set or reset the distance for re-
placing the oil filter.
The distance can be set from [ — — — ] (off) to
30.000 km in 500 km increments.
[Tyre]:
Select this item to set or reset the distance for re-
placing the tyres.
The distance can be set from [ — — — ] (off) to
30.000 km in 500 km increments.
[Other]:
Select this item to set or reset a reminder for replac-
ing something other than service, the oil filter, or
tyres.
The distance can be set from [ — — — ] (off) to
30.000 km in 500 km increments.
[Alert]
The following items are available under the [Alert]
menu.
•
[Timer]
•
[Navigation] (where fitted)
•
[Phone] (where fitted)
•
[Mail] (where fitted)
[Timer]:
Select this sub-menu to specify when the [Time for
a driver break?] message activates.
The time can be set from [ — — — ] (off) to 6 hours
in increments of 30 minutes.
[Navigation] (where fitted):
Select this item to enable/disable the navigation sys-
tem information in the vehicle information display.
[Phone] (where fitted):
Select this item to enable/disable incoming call in-
formation in the vehicle information display.
[Mail] (where fitted):
Select this item to enable/disable incoming mail in-
formation in the vehicle information display.
2-18 Instruments and controls
Summary of Contents for ALASKAN 2017
