Renault ALASKAN 2017 Driver'S Handbook Manual Download Page 73

Page: 73 / 340

•

Remote Control Key system (where fitted)

— “Push-button ignition switch (models with Re-

mote Control Key system)” in the “5. Starting

and driving” section

•

Oil control system (where fitted)

— “Oil control system (where fitted for diesel

engine model)” later in this section

•

Tyre Pressure information (where fitted)

— “Tyre Pressure Monitoring System (TPMS)

(where fitted)” in the “5. Starting and driving”

section

HOW TO USE THE VEHICLE

INFORMATION DISPLAY

The vehicle information display can be changed us-

ing the <ENTER> and BACK buttons located on the

left side of the steering wheel.

Back button

Press the BACK button to return to the previous dis-

play screen or menu level, or to cancel the selection

if it is not completed.

Display scrolling switch

The display scrolling switch can be used in three dif-

ferent ways. Push

to scroll up or

to scroll

down through the items in the vehicle information

display. Press <ENTER>

B to select an item in the

display, then push

to scroll through the

associated menu options.

SETTINGS

The settings mode allows you to change the infor-

mation displayed in the vehicle information display:

•

[Driver Assistance]

•

[Clock]

•

[Display Settings]

•

[Vehicle Settings]

•

[Maintenance]

•

[Alert]

•

[Tyre Pressures] (where fitted)

•

[Units]

•

[Language]

•

[Factory Reset]

NIC3083

Type A

NIC3124

Type B

Instruments and controls

2-15

Summary of Contents for ALASKAN 2017





















































































































































































































































































































































Search results

Summary of Contents for ALASKAN 2017

Reviews:

Related manuals for ALASKAN 2017

Brands by name

Popular brands

Renault ALASKAN 2017, Driver'S Handbook Manual

Search results

Summary of Contents for ALASKAN 2017

Reviews:

Related manuals for ALASKAN 2017

Brands by name

Popular brands