Renault ALASKAN 2017 Driver'S Handbook Manual Download Page 151

Page: 151 / 340

There may be a small visible distance between the

vehicle and the object in the bird’s-eye view

B on

the monitor.

Moving closer to a projecting object

The position

C is shown further than the position

B in the display. However, the position

C is actu-

ally at the same distance as the position

A . The

vehicle may hit the object when moving toward the

position

A if the object projects over the actual

moving course.

HOW TO ADJUST THE SCREEN

VIEW

To adjust the display brightness of the 360° Cam-

era, use the settings described in the separately

provided Touchscreen Navigation owner’s manual.
Do not adjust the settings while the vehicle is mov-

ing. Make sure the handbrake is firmly applied.

OPERATING TIPS

•

The screen displayed on the 360° Camera will

automatically return to the previous screen 3 min-

utes after the <CAMERA> button has been

pushed while the shift lever is in a position other

than the R (Reverse) position.

•

When the view is switched, the display images

on the screen may be displayed with some de-

lay.

•

When the temperature is extremely high or low,

the screen may not display objects clearly. This

is not a malfunction.

•

When strong light shines directly on to the cam-

era, objects may not be displayed clearly. This is

not a malfunction.

•

The screen may flicker under fluorescent light.

This is not a malfunction.

•

The colours of objects on the 360° Camera dis-

play may differ somewhat from the actual colour

of objects. This is not a malfunction.

NAA1696

NAA1169

Display screen, heater and air conditioner, and audio system

4-19

Summary of Contents for ALASKAN 2017





















































































































































































































































































































































Search results

Summary of Contents for ALASKAN 2017

Reviews:

Related manuals for ALASKAN 2017

Brands by name

Popular brands

Renault ALASKAN 2017, Driver'S Handbook Manual

Search results

Summary of Contents for ALASKAN 2017

Reviews:

Related manuals for ALASKAN 2017

Brands by name

Popular brands