Regency Fireplace Products Grandview G800EH, Owners & Installation Manual

Page: 80 / 104

80 | Grandview
®
G800EH Gas Fireplace
installation
Operation Using an Optional Wall Thermostat
This unit ships with a full function remote control as standard equipment. This allows for basic on/off function, as well as the ability to operate as a thermostat.
With the addition of an optional wall cradle (820-477-AWT) available from an authorized dealer, the remote can reside on a wall and carry out all the functions
of a typical millivolt wall thermostat as well as control the fan speed and flame height. This is the recommended procedure for operating the unit with a
thermostatic set point. If a millivolt wall thermostat is required for bedroom installation or as a preferred method of controlling the stove, see noted option.
Wall thermostat and remote. Set the wall thermostat to the desired set point, then place the remote transmitter in either SMART or thermostatic mode with
a set point 5 degrees above the set point on the wall thermostat. The burner will fire until the set point on the wall thermostat is satisfied. The remote will
remain connected and allow full control of all accessories.
For the optional wall thermostat wiring details see wiring diagram on previous page.