Regency Fireplace Products Grandview G800EH, Owners & Installation Manual

Page: 28 / 104

28 | Grandview
®
G800EH Gas Fireplace
installation
Cool Wall Installation - Framing
Framing Dimensions Description Cool Wall Cool Wall
with Finishing Trim or Faceplate
M Framing Width 36-1/2" (927mm) 37-1/2" (952mm)
N* Framing Height 43" (940mm)
O Framing Depth 22" (559mm)
P Corner Facing Wall Width 42-1/2" (1035mm)
Q Corner Facing Wall Width 60" (1524mm)
R Framed Chase Ceiling Enclosure 82" (2083mm)
S Vent Centerline Height 44" (1118mm)
T Gas Connection Height 1-1/2" (38mm)
U Gas Connection Inset 6-3/8" (162mm)
V Gas Connection Width 3" (76mm)
W Clearance to Corner of Unit 2-3/4" (70mm)
* Important: Framing height requires consideration of the hearth height. Dimension N = N + the thickness of the installed hearth.
Q
P
R
M
N
O
S
S
U
T
V
Combustible header
Top Vent
Rear Vent
W
Corner=Top Vent Only
IMPORTANT: Corner applications are vented from the top
only - rear venting cannot be used.
Note: The 2 standoffs at the rear of the appliance may be removed as these are not required in this application. Ensure that any screws that are
removed are reinstalled. The 2 standoffs can be recycled/discarded.
**The framing depth/width does not take into account dry wall/wood or similar materials against the back /side wall. The framing
depth will need to change based on the thickness of the material
(example: M - 36-1/2" framing width + 1/2" drywall = 37")
(example: M Outside finish with finishing trim/faceplate - 37-1/2" framing width + 1/2" drywall = 38")
(example: O - 16-7/8" framing depth + 1/2" drywall = 17-3/8")
**
**
R