Regency Fireplace Products Grandview G800EH Owners & Installation Manual Download Page 46 | Manualshive

Page: 46 / 104

background image

46

| Grandview

®

G800EH Gas Fireplace

installation

Wall Board/Drywall Installation G800EH

WARNING! Risk of Fire! Comply with all minimum clearances to combustibles as specified.

Finishing Instructions:

It is important to follow the framing and finishing instructions to ensure proper placement of fireplace into the surrounding framing/finishing materials.

Wall board materials 1/2 in. thick are specified in this installation manual to properly align with the optional finishing methods offered with this appliance. The

G800EH may be finished to the appliance opening with 1/2 inch thick drywall or non combustible material depending on the application and requirements.

The nailing flanges allow for adjustments up to 1-1/4" thickness of material.

• Ensure that the back and side clearances are maintained.

WARNING!

Risk of Fire! Maintain specified air space clearances to combustibles. Inadequate air space could cause overheating and fire.

The appliance is designed to be used with 1/2 in. wall sheathing materials such as drywall, plywood, wood composites, or non-combustible materials.

Thicker materials may be used. Refer to facing and finishing details in this manual.

Facing Material

• Facing and/or finishing materials must never overhang into the glass opening.

• Facing materials may be combustible or non-combustible

WARNING!

Risk of Fire! DO NOT apply combustible materials beyond the minimum clearances. Comply with all minimum clearances to combustibles as

specified in this manual. Overlapping materials could ignite and will interfere with proper operation.

PAINTING

If desired finishing includes a painted wall, 100% acrylic latex, oil-based or standard acrylic paints may be used.

Follow paint manufacturer’s instructions for paint and primer application.

NO SCREW ZONE

«
...
44
45
46
47
48
...
»

Summary of Contents for Grandview G800EH









































































































Reviews:

No comments

Related manuals for Grandview G800EH

Brand: Hargrove Pages: 5

Brand: Napoleon Pages: 136

Brand: GreenSmart Pages: 26

(V)KC42NE SERIE

Brand: Desa Pages: 40

Brand: Valor Pages: 60

Brand: Nu-Flame Pages: 15

Brand: Napoleon Pages: 2

Brand: Qindao Hichanse Group Pages: 16

Brand: Valor Pages: 45

Brand: Somogyi Elektronic Pages: 35

Brand: Style selections Pages: 17

AURA Fire Table

Brand: Seaside Casual Pages: 2

Brand: IHP Pages: 2

Brand: IHP Pages: 2

Brand: IHP Pages: 24

True Vision 1000 RD

Brand: M Design Pages: 26

Brand: Rush Pages: 10

Brand: Extremis Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands