background image

Electric Builder Box 

E-1

CONSUMER SAFETY INFORMATION

PLEASE READ THIS MANUAL BEFORE USING THIS APPLIANCE

WARNING

Thank you and congratulations on your purchase of a Classic Flame electric 

builder box. Please read the installation instructions before installing and 

operating this appliance.

IMPORTANT: 

Read all instructions and warnings carefully before using.

Failure to follow these instructions may result in a possible electric shock, 

fire hazard and/ or injury and will void the warranty.

For Customer Service:

E-Mail: [email protected]
In English Call: 866-661-1218
In French Call: 866-374-9203
In Spanish Call: 866-661-1218 

IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED, 

AN ELECTRIC SHOCK OR FIRE MAY RESULT CAUSING PROPERTY

                 DAMAGE, PERSONAL INJURY OR LOSS OF LIFE. 
DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE

                VAPORS AND LIQUIDS IN THE VICINITY OF THIS 

                              OR ANY OTHER APPLIANCE.

ELECTRIC BUILDERS BOX

MODEL NUMBERS:

INSTALLATION GUIDE

36EB110-GRT, 36EB111-GRC

36EB220-GRT, 36EB221-GRC

Twin-Star International, Inc.
Delray Beach, FL 33445
                  U.S.A.
             Made in China
             Printed in China
©2010,Twin-StarInternational,Inc.

Summary of Contents for 36EB110-GRT
















Reviews: