Raven viper, Installation & Operator'S Manual

Page: 165 / 182

CHAPTER
16
Scout Groups and Features: 157
CHAPTER 16
SCOUT GROUPS AND
FEATURES
IMPORTANT SAFETY NOTES
When operating with an automatic section control system or feature with the ROS device:
• Always toggle the master switch to the off position and keep by-standers clear of all equipment when using the
scout group manager during a field operation.
ROS may activate sections or control system‘s hardware immediately if a scouting feature is added or removed
from the selected scout group.
• Use caution when loading or copying scout groups or features during an active job with an automatic section
control system or feature in use with the ROS device.
Toggle the vehicle or implement master switch off when loading section groups to avoid activating sections in
areas not intended for application or coverage.
SCOUT GROUPS OVERVIEW
ROS saves features such as field and zone boundaries, scouting lines, or flags as components of a scout group.
Each job may utilize multiple scout groups or features may be copied from one scout group to another to
complete various phases of a field operation.
The following sections are intended to assist with using ROS to perform scouting functions such as recording field
boundaries, zone maps, or marking various field areas for future reference.
SCOUTING WIDGET
The scouting widget is required to record scouting features during field operations. Refer to
the Add Widgets to a Screen Layout section on page 138 to add the scouting widget to a
screen layout before performing the following procedures.
SCOUTING FEATURES
The following features may be recorded and stored with scout groups on a ROS device:
Field Boundaries. Boundaries allow the operator to mark the field perimeter or outline the field area.
CAUTION