Raven viper Installation & Operator'S Manual Download Page 101

Page: 101 / 182

Differential GPS (DGPS) Set Up:

DIFFERENTIAL GPS (DGPS) SET UP

TABLE 1. Unlock and Correction Purchase Information

FIGURE 1. Authorization Code Entry

NOTE:

After successfully inputting a new authorization code, the receiver model information will update on

the GPS information page.

RECEIVER FIRMWARE UPDATES

Updates to the integrated device receiver may be made available periodically on the Raven Help web site:

www.ravenhelp.com

The following items will be required to update the integrated receiver:

•

ROS device with an integrated receiver serial number starting with “BFN.”

•

Home or office PC or laptop with Microsoft Windows

operating system and the WinLoad utility.

NOTE:

WinLoad is not compatible with 64-bit operating systems.

•

Serial cable

•

USB to serial adapter (optional)

•

ROS device cable with “GPS Out” connector

•

firmware update .hex file

Feature

Purchase Location

GS Corrections Unlock

Contact a Raven Dealer

Satellite GS Subscription

www.ravenslingshot.com/store

Summary of Contents for viper






















































































































































































Search results

Summary of Contents for viper

Reviews:

Related manuals for viper

Brands by name

Popular brands

Raven viper, Installation & Operator'S Manual

Search results

Summary of Contents for viper

Reviews:

Related manuals for viper

Brands by name

Popular brands