Raven viper Installation & Operator'S Manual Download Page 83

Page: 83 / 182

Machine Panel and Configurations:

MACHINE PANEL AND CONFIGURATIONS

PANEL NAVIGATION

MACHINE CONFIGURATIONS

Touch the machine configuration panel to view additional configurations (if available). The panel must also be

expanded to select the following machine configuration options:

Add New Machine Configuration.

Touch the Add button to create a new machine

configuration.

Edit Machine Configuration.

Select the Edit button to access the machine and

implement garages and edit equipment profiles.

Delete Machine Configuration.

Touch the Delete button to remove an existing

machine configuration from the machine panel. Any machine or implement

profiles assigned to the deleted configuration will still be available in the

machine or implement garage.

MACHINE DEVICES

Touch the machine devices button to expand the machine devices panel and access additional GPS, serial, and

CANbus device settings.

MACHINE AND IMPLEMENT PROFILES

Machine profiles store information such as the machine geometry and GPS antenna mounting position which will

be used to provide guidance during field operations. To complete the machine configuration, machine profiles are

paired with either a pull-type implement or a self-propelled, or fixed, implement profile.

Create New

Machine

Configuration

Edit Machine

Configuration

Delete Selected

Configuration

Selected

Machine

Configuration

Edit

Machine

Devices

Detected

Machine

Configurations

Add New

Machine

Configuration

Edit Machine

Configuration

Delete Machine

Configuration

Self-Propelled

Machine Profile

Tractor Machine

Profile

Pull-Type

Implement Profile

Self-Propelled

Machine Configuration

Tractor and Implement

Machine Configuration

Summary of Contents for viper






















































































































































































Search results

Summary of Contents for viper

Reviews:

Related manuals for viper

Brands by name

Popular brands

Raven viper, Installation & Operator'S Manual

Search results

Summary of Contents for viper

Reviews:

Related manuals for viper

Brands by name

Popular brands