Raritan CC-SG, Administrator'S Manual

Page: 171 / 258

C
HAPTER
12: A
DVANCED
A
DMINISTRATION
157
2. Click the Modems tab.
Figure 158 Modems Tab
3. Click Properties .
4. Click the Advanced tab.
Figure 159 Extra Initialization Commands
5. Type an initialization command in Extra initialization commands that will be used by your
modem to set the “Carrier detection” flag. For example, type at&c for a SoftK56 Data Fax
modem. This is necessary to tell Windows not to close the started Modem connection process
when the modem connection is closed from the other (dialed-in) side. Click
OK to save the
settings.
Configure the Dial-Up Connection
The following procedure illustrates creating an inbound dial-up connection to CC-SG from a
Windows XP client machine:
1. On the start menu, click My Network Places .
2. Right-click in the window and select Properties .