Raritan CC-SG, Administrator'S Manual

Page: 170 / 258

156 C
OMMAND
C
ENTER
S
ECURE
G
ATEWAY
A
DMINISTRATOR
G
UIDE
Modem Configuration
Use this screen to access a CC-SG G1 from a client machine over a dial-up connection. This
method of accessing CC-SG can be used in emergency situations.
Note: A modem is not available and cannot be configured on the V1 or E1 platforms.
Configure CC-SG
1. On the Administration menu, click Configuration . When the Configuration Manager screen
appears, click the Modem tab.
Figure 157 Configuration Manager Modem Screen
2. Type the IP address of the CC-SG in the Server Address field .
3. Type the IP address of the client that will dial into CC-SG in the Client Address field.
4. If you are using call-back dialing, type the call-back number that CC-SG dials to connect to
the client in the
Client Phone field.
5. Click Update Configuration to save the modem information.
Configure the Modem on Client PC
Connect a phone line to the CC-SG G1, which has a built-in modem. Optionally, remove the
LAN cables.
On the client that will be dialing in, connect a modem to the client machine, for example, a
Windows XP machine. Connect a phone line to the client modem. Restart the client machine and
the connected modem is discovered as new hardware. Install the modem on the client as follows,
which assumes a Windows XP client machine:
1. Select Control Panel
Æ
Phone and Modem Options .