Remote Commands
R&S
®
ZNH
249
User Manual 1334.5985.02 ─ 02
List of commands
CALCulate<1...2>:MATH<1...2>:COPY:MEMory<1...3>
......................................................249
DISPlay<1...2>[:WINDow]:TRACe<1...2>:MEMory<1...3>[:STATe]
...................................... 249
DISPlay<1...2>[:WINDow]:TRACe<1...2>:MODE
...............................................................250
.............................................................................................251
...................................................................................251
MEASurement<1...2>:ISUP:APER:AUTO
......................................................................... 252
CALCulate<1...2>:MATH<1...2>:COPY:MEMory<1...3>
[<MemorySlot>]
This command stores the selected trace into the memory trace of the R&S
ZNH.
This command is an event and therefore has no query and no *RST value.
The numeric suffix at CALCulate and MEMory are irrelevant for this command.
The numeric suffix at MATH selects the number of the trace.
Suffix:
<1...2>
.
1...2
<1...2>
1...2
<1...3>
1...3
Parameters:
<MemorySlot>
Example:
CALC:MATH:COPY:MEM
Usage:
Setting only
Copies the trace into the memory.
DISPlay<1...2>[:WINDow]:TRACe<1...2>:MEMory<1...3>[:STATe]
<State>
This command turns the memory trace on and off.
The numeric suffix at DISPlay and MEMory are irrelevant for this command.
The numeric suffix at TRACe selects the number of the trace.
Suffix:
<1...2>
.
1...2
<1...2>
1...2
<1...3>
1...3
Parameters:
<State>
ON | OFF
*RST:
OFF
Remote Control - Commands
