R&S ZNH, User Manual

Page: 102 / 369

Working with the Measurement Wizard
R&S
®
ZNH
95 User Manual 1334.5985.02 ─ 02
6 Working with the Measurement Wizard
When testing antennas and making measurement which involves complex signals, it is
often necessary to perform a sequence of standardized and recurring measurements,
often in an environment that is not easily accessible. To make sure that measurements
are performed as required and to avoid a constant adjustment of parameters, the
R&S
ZNH features a measurement wizard.
The measurement wizard allows you to combine several individual measurement con-
figurations to a sequence of measurements (or measurement set). As all relevant
parameters have been set before the actual measurement and cannot be changed
once the measurement procedure has begun, the wizard is a good way to avoid mis-
takes and save time when setting up measurements. You can use the wizard for mea-
surements in all the operating modes.
Note that it is necessary to install and use the R&S InstrumentView software package if
you want to configure the measurement steps and parameters in the measurement
wizard.
For details on the individual measurements you can perform with the wizard, refer to
the corresponding chapters.
●
Chapter 8, "Vector Network Analysis" , on page 146
●
Chapter 7, "Cable and Antenna Test Mode" , on page 106
●
Chapter 9, "Vector Voltmeter" , on page 168
●
Chapter 10, "Power Meter" , on page 171
●
Chapter 11, "Performing Pulse Power Measurements" , on page 181
You can use the wizard for measurements in all operating modes.
The following chapters illustrates the wizard measurements used in the "Cable &
Antenna" mode.
Note: It is necessary to install and use the R&S InstrumentView software package if
you want to access the measurement wizard.
6.1 Performing and Configuring Measurements
Before you can use the measurement wizard, you have to define a measurement set
using the "Wizard Set Editor" in the R&S InstrumentView software package.
The R&S InstrumentView software package is delivered with the R&S ZNH. The latest
version is also available for download on the R&S ZNH website at http://www.rohde-
schwarz.com/product/znh.html .
After creating the measurement wizard set using the R&S InstrumentView, transfer the
file to the R&S
ZNH.
For more information of the "Wizard Set Editor", see the R&S InstrumentView manual.
Performing and Configuring Measurements