Remote Commands
R&S
®
ZNH
274
User Manual 1334.5985.02 ─ 02
CALCulate<1...2>:MARKer<1...6>:FUNCtion:DTF:PEAK:RESult?
This command queries the DTF peak result on the marker position.
The numeric suffix at CALCulate is irrelevant for this command.
The numeric suffix at MARKer define the marker position.
Suffix:
<1...2>
.
1...2
<1...6>
1...6
Example:
CALC:MARK1:FUNC:DTF:PEAK:RES?
Return the DTF peak value at marker 1 postion.
Usage:
Query only
CALCulate<1...2>:TRANsform:DTFault:PEAK:COUNt?
The following commands configure the DTF peak list. The peak list is available for DTF
measurements only.
The numeric suffix at CALibration is irrelevant for this command.
This command is a query and therefore has no *RST value.
Suffix:
<1...2>
.
1...2
Parameters:
<Return values>
<DTFListEntries>
Example:
CALC:TRAN:DTF:PEAK:COUN?Z
Queries the number of values in the DTF list.
Usage:
Query only
CALCulate<1...2>:TRANsform:DTFault:PEAK:DATA<1...10>?
This command queries the DTF list.
The numeric suffix at CALibration is irrelevant for this command and the number suffix
at DATA selects an entry in the DTF list.
This command is a query and therefore has no *RST value.
Suffix:
<1...2>
.
1...2
<1...10>
1...10
Parameters:
<Retrun values>
<distance>,<return loss>
The number of values depends on the number of peaks that
exceed the threshold you can set with
TRANsform:DTFault:PEAK:THReshold
Remote Control - Commands
