Remote Commands
R&S
®
ZNH
304
User Manual 1334.5985.02 ─ 02
SYSTem:SET
[<arg0>]
This query
SYSTem:SET?
causes the data of the current instrument setting to be
transmitted to the control computer in binary format (SAVE function). The data can be
read back into the instrument (RECALL function) by means of command
SYSTem:SET
<block>
.
Whilst the data records are stored on the instrument hard disk with SAVE/RECALL
(
MMEMory:STORe
,
MMEMory:LOAD
), it is possible to store the data in an external com-
puter by means of
SYSTem:SET
.
The receive terminator has to be set to EOI to ensure reliable transfer of data (setting
SYST:COMM:GPIB:RTER EOI
).
Parameters:
<arg0>
<block_data>
Example:
SYST:SET
SYSTem:SHUTdown
This command turns the R&S
ZNH off.
This command is an event and therefore has no *RST value and no query.
Example:
SYST:SHUT
Turns the R&S
ZNH off.
Usage:
Event
SYSTem:TIME
<Hour>, <Minutes>, <Seconds>
This command sets the internal clock.
Parameters:
<Hour>
Range:
0 to 23
<Minutes>
Range:
0 to 59
<Seconds>
Range:
0 to 59
Example:
SYST:TIME 12,30,30
SYSTem:TZONee
<Hour>, <Minutes>
This command defines a shift of the system time to select another time zone.
Parameters:
<Hour>
Range:
0 to 23
<Minutes>
Range:
0 to 59
*RST:
0,0
Example:
SYST:TZON 01,00
Shifts the time an hour ahead.
Remote Control - Commands
