R&S ZNH, User Manual

Page: 171 / 369

Vector Network Analysis
R&S
®
ZNH
164 User Manual 1334.5985.02 ─ 02
8.4.1 Working with Traces
When working with traces, it is important to select the right trace label to work with.
► Press the [TRACE] key.
The R&S ZNH displays the trace functions for selection.
8.4.1.1 Add / Delete Traces
You can add up to four measurement traces in all display measurement trace windows.
For more information, see
Chapter 4.1.4, "Measurement Trace Window" , on page 32.
1. Select "New Trace" to add a new measurement trace on the selected measure-
ment trace window.
● "Add Trace": A default "S21" measurement with "dB Mag" trace format is
added.
● "Add Trace + Disp": A new trace is added to a new measurement trace window.
2. Select "Delete Trace" to delete the selected trace.
The R&S ZNH opens a submenu to delete the trace measurement.
● "Delete Selected": The selected trace measurement is deleted.
If the selected trace is the only trace in the measurement trace window, the
affected measurement trace window will be removed.
Note: "Trc1" measurement is not removable.
● "Delete All": All traces except "Trc1" are deleted from the display measurement
trace windows.
3. Delete the required trace.
8.4.1.2 Selecting the Trace Mode
The R&S ZNH provides two trace modes to write the trace: "Average On" and "Aver-
age Off".
For more information, see Chapter 7.3.1.1, "Setting the Trace Mode" , on page 134.
8.4.1.3 Selecting Suppressing Interfering Signals
The selection of suppressing interfering signals affect all the display trace measure-
ments.
For more information, see Chapter 7.3.1.2, "Suppressing Interfering Signals" ,
on page 134.
8.4.1.4 Working with Memory Traces
The R&S ZNH supports a total of four measurement traces and each trace can be
transferred to the trace memory for comparison.
Analyzing Measurement Results