R&S ZNH, User Manual

Page: 295 / 369

Remote Commands
R&S
®
ZNH
288 User Manual 1334.5985.02 ─ 02
This command is an event and therefore has no *RST value and no query.
The numeric suffix at DISPlay is irrelevant for this command.
Parameters:
<TargetFile>
Example: HCOP:DEV:LANG PNG
MMEM:NAME '\Public\Screen Shots\Test.png'
DISP:WIND:STOR
Makes and stores a screenshot of the current screen in a file
'Test.png'.
Usage: Setting only
HCOPy:DEVice:LANGuage <Format>
This command selects the file format for screenshots.
Parameters:
<Format> PNG | JPG
Example: HCOP:DEV:LANG PNG
Selects the png format for screenshots.
HCOPy[:IMMediate]
This command makes a screenshot of the current display content in png format and
stores it on the R&S
ZNH internal memory.
You can select a filename for the screenshot in png format with
MMEMory:NAME
on page 288 and select the file format of the screenshot with
HCOPy:DEVice:
LANGuage
on page 288.
To make a screenshot in jpg format, use
DISPlay<1...2>[:WINDow]:STORe
on page 287.
This command is an event and therefore has no *RST value and no query.
Example: HCOP:DEV:LANG PNG
MMEM:NAME '\Public\Screen Shots\Test.png'
HCOP
Makes and stores a screenshot of the current screen in a file
'Test.png'.
Usage: Event
MMEMory:NAME <FileName>
This command defines the path and filename that the R&S ZNH uses for storing
screenshots (see
HCOPy[:IMMediate]
on page 288). The path and filename comply
with DOS conventions.
This command is an event and therefore has no *RST value and no query.
Remote Control - Commands