R&S ZNH User Manual Download Page 83

Page: 83 / 369

Instrument Functions

R&S

ZNH

User Manual 1334.5985.02 ─ 02

5.2

On-screen Keyboard

The on-screen keyboard is an additional means of interacting with the instrument. It
provides convenience of usage with the touchscreen input.

Accessing the on-screen keyboard is only available for text-based entry, e.g. save or
open a filename.

Touchscreen interface

If the

touchscreen interface

is not activated, the on-screen keyboard is disabled.

The on-screen keyboard display can be switched on and off using the on-screen key-
board

icon highlighted at the top right-hand corner.

On-screen Keyboard

Summary of Contents for ZNH


















































































































































































































































































































































































Search results

Summary of Contents for ZNH

Reviews:

Related manuals for ZNH

Brands by name

Popular brands

R&S ZNH, User Manual

Search results

Summary of Contents for ZNH

Reviews:

Related manuals for ZNH

Brands by name

Popular brands