Getting Started
R&S
®
ZNH
18
User Manual 1334.5985.02 ─ 02
When laid out horizontally for operation from above, the R&S
ZNH is tilted slightly due
to the micro-stand at the back. This position provides the optimum viewing angle for
the display.
To allow easy operation from the front and still be able to read the display, you can
swing out the support on the back of the R&S
ZNH.
Before you turn on the R&S
ZNH, you should insert the lithium ion battery included in
the delivery into the battery compartment located at the back of the R&S
ZNH.
Insert battery
1. Unscrew the two thumb screws located on the battery compartment.
2. Open the cover.
3. Insert the battery into the R&S
ZNH.
4. Close the cover and screw back the thumb screws.
You can operate the R&S
ZNH with the AC adapter or the battery. Both are included in
the delivery.
3.1.1.4
Using the AC Adapter
Risk of instrument damage
To avoid instrument damage:
●
Only use the power supply (R&S HA-Z301, order number 1321.1386.02) included
in the delivery.
●
Make sure that the AC supply voltage is compatible to the voltage specified on the
power supply unit.
●
Attach the appropriate adapter to the power supply.
Connect the AC adapter to the DC port on the left side of the R&S
ZNH (item 1 of
). Make sure to fully insert the AC adapter plug into the DC port.
Depending on the system you need, firmly connect the appropriate power cable inclu-
ded in the delivery to the AC adapter (item 2 of
Preparing for Use
