manualshive.com logo in svg

R&S FSV3000 Series, User Manual

The R&S FSV3000 Series user manual is a comprehensive guide that provides detailed instructions and insights for operating this advanced product. To aid users, we offer a free download of the manual from our website, granting easy access to valuable information and ensuring optimal performance.

Share
Download
background image

Index

R&S

®

FSV/A3000 I/Q

 

Analyzer

302

User Manual 1178.8536.02 ─ 01

Filters

Bandwidth, I/Q data .................................................... 79
Equalizer ..................................................................... 17
YIG (remote) ............................................................. 141

Format

Data .......................................................................... 283
Data (remote) ............................................................272
I/Q data files ..............................................................284

Frame count

Softkey ........................................................................ 85

Frames

Spectrogram marker ................................................. 102

Free Run

Trigger .........................................................................73

Frequency

Configuration .............................................................. 70
Configuration (remote) .............................................. 181
External generator ...................................................... 60
Offset .......................................................................... 71

Frequency coupling

Automatic, external generator .....................................32
External generator ................................................ 31, 60
Reverse sweep, external generator ............................ 33
TTL synchronization, external generator .................... 32

Frequency denominator

External generator ...................................................... 60

Frequency numerator

External generator ...................................................... 60

Frequency offset

External generator ................................................ 32, 60

Frequency range

Calibration sweep, external generator ........................ 32

Frequency-converting measurements

External generator ...................................................... 32

FRQ

External generator ...................................................... 34

G

Gating

I/Q data ..................................................................... 191
Source ........................................................................ 73

Generator

Frequencies, external generator ........................... 32, 60
Frequency coupling, external generator ..................... 60
Frequency offset, external generator .......................... 59
Output power, external generator ............................... 59

Generator type

External generator ...................................................... 57

Generators

Frequency range, external generator ......................... 58
Power range, external generator ................................ 58
Setup files, external generator ........................ 28, 57, 58
Supported, external generator .................................... 27

Getting started .....................................................................5
GPIB

Address, External generator ....................................... 58
External generator ...................................................... 57
TTL synchronization, External generator .................... 58

Group delay

Smoothing ...................................................................91

H

Hardware settings

Displayed .................................................................... 11

History

Spectrograms ............................................................. 94

History Depth

Softkey ........................................................................ 94

Hold

Trace setting ............................................................... 91

Hysteresis

Lower (Auto level) ....................................................... 88
Trigger .........................................................................75
Upper (Auto level) ....................................................... 87

I

I/Q Analyzer

Data acquisition .......................................................... 17
Evaluation ................................................................... 13
I/Q Vector evaluation .................................................. 14
Magnitude evaluation ..................................................13
Maximum bandwidth ................................................... 18
Modes ....................................................................... 134
Programming example ......................................277, 278
Real/Imag (I/Q) evaluation .......................................... 15
Results ........................................................................ 13
Sample rate ................................................................ 18
Spectrum evaluation ................................................... 13

I/Q data

Analog, processing ..................................................... 17
Export file binary data description .............................290
Export file parameter description .............................. 287
Exporting ...............................................................45, 50
Exporting (remote) .................................................... 275
Exporting/Importing ...................................................125
File format description .............................................. 284
Importing ..................................................................... 45
Importing (remote) .................................................... 275
Importing/Exporting .....................................................37
Input file ...................................................................... 54
Input files .............................................................. 35, 53
Maximum bandwidth ................................................... 18
Sample rate ................................................................ 18
Trigger point in sample (TPIS) .................................. 198
Working with ............................................................. 125

I/Q gating

Edge triggered .......................................................... 191
Level triggered .......................................................... 191

I/Q measurements

Methods .................................................................... 210

I/Q Power

Trigger .........................................................................74
Trigger level (remote) ................................................186

I/Q Vector

Evaluation method ...................................................... 14
I/Q Analyzer ................................................................ 14
Markers ............................................................. 100, 230
Y-axis scaling .............................................................. 70

IF frequency

Output ......................................................................... 36

IF Power

Trigger .........................................................................73
Trigger level (remote) ................................................186

IF WIDE OUTPUT

Connector ................................................................... 79

IF/VIDEO/DEMOD

Connector ................................................................... 36

Impedance

Setting .........................................................................52

Summary of Contents for FSV3000 Series




















































































































































































































































































































Reviews:

No comments

Related manuals for FSV3000 Series

rainforest EMU Quick Start Manual preview
EMU
Brand: rainforest Pages: 2
Danfoss 40 Calibration Instruction preview
40
Brand: Danfoss Pages: 8
Olympus EPOCH 650 User Manual preview
EPOCH 650
Brand: Olympus Pages: 362
Olympus 27MG Getting Started Manual preview
27MG
Brand: Olympus Pages: 8
Xantrex LinkLITE Installation Instructions preview
LinkLITE
Brand: Xantrex Pages: 2
Xaoc Devices ZADAR Operator'S Manual preview
ZADAR
Brand: Xaoc Devices Pages: 8
Yamaha Electone 405 Data List preview
Electone 405
Brand: Yamaha Pages: 84
ZHYQ GND15 Quick Start Manual preview
GND15
Brand: ZHYQ Pages: 6
janitza UMG 96RM-P Manual preview
UMG 96RM-P
Brand: janitza Pages: 48
Danaher Veeder-Root 7990 Series Quick Start Manual preview
Veeder-Root 7990 Series
Brand: Danaher Pages: 8
Garmin DESCENT 12 Owner'S Manual preview
DESCENT 12
Brand: Garmin Pages: 22
Lutron Electronics SL-4013 Operation Manual preview
SL-4013
Brand: Lutron Electronics Pages: 13
Kawai KSP 10 Owner'S Manual preview
KSP 10
Brand: Kawai Pages: 72
PCE Instruments PCE-VT 1000 Manual preview
PCE-VT 1000
Brand: PCE Instruments Pages: 6
Righton Retinomax K+Screeen Instructions Manual preview
Retinomax K+Screeen
Brand: Righton Pages: 112
Eddyfi Technologies TSC U41 User Manual preview
TSC U41
Brand: Eddyfi Technologies Pages: 72
OrienTek TPM-25m Quick Start Manual preview
TPM-25m
Brand: OrienTek Pages: 2
Magnescale LASERSCALE BL55-RU Series Installation Manual preview
LASERSCALE BL55-RU Series
Brand: Magnescale Pages: 40

Brands by name

Popular brands

Load more brands